Netgear GS748Tv4 GS748Tv4 Software Administration Manual - Page 31
Interface Naming Convention - gs748t 48 port gigabit smart switch
View all Netgear GS748Tv4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
GS748T Smart Switch Software Administration Manual Interface Naming Convention The GS748T Smart Switch supports physical and logical interfaces. Interfaces are identified by their type and the interface number. All the physical ports 1-48 are Gigabit ports and the SFP Ports 47-50 support 1000M Speed fiber modules. Ports 47-48 are Combo ports and ports 49-50 will support dedicated SFP modules. The number of the port is identified on the front panel. You can configure the logical interfaces by using the software. The following table describes the naming convention for all interfaces available on the switch. Interface Description Example Physical The physical ports include Gigabit ports and are numbered sequentially starting from one. g1, g2, g3 Link Aggregation Group (LAG) LAG interfaces are logical interfaces that are only used for bridging functions. l1, l2, l3 CPU Management Interface This is the internal switch interface responsible for the c1 switch base MAC address. This interface is not configurable and is always listed in the MAC Address Table. Chapter 1: Getting Started | 31