Netgear GS748Tv4 GS748Tv4 Software Administration Manual - Page 52
SNMP, SNMPV1/V2, Community Configuration
View all Netgear GS748Tv4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
GS748T Smart Switch Software Administration Manual SNMP From SNMP link under the System tab, you can configure SNMP settings for SNMP V1/V2 and SNMPv3. From the SNMP link, you can access the following pages: • SNMPV1/V2 on page 52 • Trap Flags on page 55 • SNMP v3 User Configuration on page 56 SNMPV1/V2 The pages under the SNMPV1/V2 menu allow you to configure SNMP community information, traps, and trap flags. Community Configuration To display this page, click System > SNMP > SNMP V1/V2 > Community Configuration. By default, two SNMP Communities exist: • Private, with Read/Write privileges and status set to Enable. • Public, with Read Only privileges and status set to Enable. These are well-known communities. Use this page to change the defaults or to add other communities. Only the communities that you define using this page will have access to the switch using the SNMPv1 and SNMPv2c protocols. Only those communities with read/write level access can be used to change the configuration using SNMP. Use this page when you are using the SNMPv1 and SNMPv2c protocol. 52 | Chapter 2: Configuring System Information