Netgear GS748Tv4 GS748Tv4 Software Administration Manual - Page 215
Admin Status, Enable, Disable, Apply, Messages Relayed, Messages Ignored, Host Address
View all Netgear GS748Tv4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 215 highlights
GS748T Smart Switch Software Administration Manual To configure local log server settings: 1. Use the radio buttons in the Admin Status field to determine whether to send log messages to the remote syslog hosts configured on the switch. • Enable: Messages will be sent to all configured hosts (syslog collectors or relays) using the values configured for each host. • Disable: Stops logging to all syslog hosts. Disable means no messages will be sent to any collector/relay. 2. In the Local UDP Port field, specify the port on the switch from which syslog messages are sent. 3. Click Apply to save the settings. The Server Log Configuration area also displays the following information: • The Messages Relayed field shows the number of messages forwarded by the syslog function to a syslog host. Messages forwarded to multiple hosts are counted once for each host. • The Messages Ignored field shows the number of messages that were ignored. To configure a remote log server 1. To add a remote syslog host (log server), specify the settings in the following list and click Add. • Host Address. Specify the IP address or hostname of the host configured for syslog. • Port. Specify the port on the host to which syslog messages are sent. The default port is 514. • Severity Filter. Use the menu to select the severity of the logs to send to the logging host. Logs with the selected severity level and all logs of greater severity are sent to Chapter 6: Monitoring the System | 215