Panasonic WJ-HD716/1000 Installation Guide - Page 129
Format the hard disk drives [Format]
View all Panasonic WJ-HD716/1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Format the hard disk drives [Format] Hard disk drives will be formatted, and one of the normal recording area, event recording area or pre-event recording area will be assigned to each drive. It is necessary to format a hard disk drive on either of the following conditions. • When an hard disk drive installed in the recorder is removed or added • When an optional extension unit is connected and used for the first time Important: • When the hard disk drive is formatted, all the recorded images will be deleted. • In the single mode, the capacity of each hard disk drive is configured and formatted. In the RAID 5/RAID 6 mode, the capaci- ty of each hard disk drive is configured and formatted by the unit. • Hard disk drives that have already been installed or unformatted drives that are newly installed will automatically be formatted as the normal recording area when they are recognized. • It is impossible to assign two or more recording areas to a hard disk drive. Step 1 Select the [Format] button on the disk configuration page. Step 2 Select the recording area to be assigned to each hard disk drive (to each unit in the RAID 5/RAID 6 mode). → The [Format] tab will be displayed. Normal: Assigned to the normal recording area Event: Assigned to the event recording area -: Not formatted Step 3 Select the [Format] button after setting the recording areas for the hard disk drives. → The confirmation window will be displayed. . 129