Panasonic WJ-HD716/1000 Installation Guide - Page 87
Configuring the sequence display settings
View all Panasonic WJ-HD716/1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Configuring the sequence display settings Configure the sequential display settings of camera images. When selecting the [Setup] button of "Live sequence" on the [Monitor 1] tab, the setup page for live sequence will be displayed. (☞ Page 86) Configure the following setting items for each step of sequential display. Up to 16 steps can be registered. [Cam.] Select a camera image to be displayed at each step from the following. Cam. 1 to Cam. 16: Displays an image from the selected camera channel on a single screen. 4Screen-A/4Screen-B/4Screen-C/4Screen-D/ 4Screen(WD)/7Screen(WD)/8Screen/9Screen-A/ 9Screen-B/9Screen(WD)/12Screen(WD)-A/ 12Screen(WD)-B/16Screen Refer to page 84 for further information about each setting value. [Preset position] Select a camera preset position (---, 1 to 256). When "---" is selected, the camera does not move to any preset position. [Dwell time] Select an interval time to go to the next sequential step. 2s/3s/5s/10s/20s [Back] button Closes the setup page for live sequence and returns to the [Monitor 1] tab. 87