Panasonic WJ-HD716/1000 Installation Guide - Page 138
Operation of the extension unit
View all Panasonic WJ-HD716/1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Operation of the extension unit When connecting an extension unit, it is necessary to add the extension unit to the system. It is also necessary to start the shutdown process of the extension unit to remove the extension unit from the system. Add an extension unit to the system The extension unit will be recognized as playback-only disks just after connecting it to the recorder. To use as recordable disks, it is necessary to add the extension unit to the system. It is possible to use all the hard disk drives in the extension unit as recordable disks by adding the extension unit to the system as follows. Addition the playback-only disk to the system can be made on the HDD Configuration menu. Before the following procedure, remove the front cover from the recorder.(☞ page 21) Step 1 Step 3 Hold down the [USE] button for 2 seconds or more. → The buzzer will start sounding. The HDD Configuration menu will be displayed on Monitor 2. Select the extension unit to add to the system, and select the [OK] button. Extension unit: Ext.x (x: unit number) Step 2 Move the cursor onto the "Execute>" button of "Add HDD unit". → The "Add HDD unit" window will be displayed. → The addition process will start. When the addition process is completed, all the hard disk drives in the extension unit will become recordable. The HDD indicator (STS (status)) on the front panel will light green. Note: • It is impossible to add a hard disk drive to the system when a pre-event recording area is created in the hard disk drive. In this case, it is necessary to format the hard disk drive. 138