ZyXEL NBG6515 User Guide - Page 117
Network Address Translation NAT
View all ZyXEL NBG6515 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
CHAPTER 16 Network Address Translation (NAT) 16.1 Overview NAT (Network Address Translation - NAT, RFC 1631) is the translation of the IP address of a host in a packet. For example, the source address of an outgoing packet, used within one network is changed to a different IP address known within another network. Each packet has two addresses - a source address and a destination address. For outgoing packets, NAT maps private (local) IP addresses to globally unique ones required for communication with hosts on other networks. It replaces the original IP source address in each packet and then forwards it to the Internet. The NBG keeps track of the original addresses and port numbers so incoming reply packets can have their original values restored. The following figure illustrates this. Figure 88 NAT Example For more information on IP address translation, refer to RFC 1631, The IP Network Address Translator (NAT). 16.2 What You Can Do • Use the General screen (Section 16.3 on page 118) to enable NAT and set a default server. • Use the Application screen (Section 16.4 on page 118) o forward incoming service requests to the server(s) on your local network. • Use the Advanced screen (Section 16.5 on page 120) to change your NBG's trigger port settings. NBG6515 User's Guide 117