ZyXEL NBG6515 User Guide - Page 137
What You Need To Know, General Screen, Advanced Screen
View all ZyXEL NBG6515 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Chapter 21 Bandwidth Management 21.3 What You Need To Know The sum of the bandwidth allotments that apply to the WAN interface (LAN to WAN, WLAN to WAN) must be less than or equal to the Upstream Bandwidth that you configure in the Bandwidth Management Advanced screen (Section 21.5 on page 137). The sum of the bandwidth allotments that apply to the LAN interface (WAN to LAN, WAN to WLAN) must be less than or equal to the Downstream Bandwidth that you configure in the Bandwidth Management Advanced screen Section 21.5 on page 137. 21.4 General Screen Use this screen to have the NBG apply bandwidth management. Click Management > Bandwidth Management to open the bandwidth management General screen. Figure 103 Management > Bandwidth Management > General The following table describes the labels in this screen. Table 68 Management > Bandwidth Management > General LABEL Enable Bandwidth Management DESCRIPTION This field allows you to have NBG apply bandwidth management. Enable bandwidth management to give traffic that matches a bandwidth rule priority over traffic that does not match a bandwidth rule. Apply Reset Enabling bandwidth management also allows you to control the maximum or minimum amounts of bandwidth that can be used by traffic that matches a bandwidth rule. Click Apply to save your customized settings. Click Reset to begin configuring this screen afresh. 21.5 Advanced Screen Use this screen to configure bandwidth management rules for the pre-defined services or applications. You can also use this screen to configure bandwidth management rule for other services or applications that are not on the pre-defined list of NBG. Additionally, you can define the source and destination IP addresses and port for a service or application. NBG6515 User's Guide 137