ZyXEL NBG6515 User Guide - Page 161

Maintenance, Password

Page 161 highlights

Chapter 25 Maintenance The following table describes the labels in this screen. Table 76 Maintenance > General LABEL DESCRIPTION System Setup System Name System Name is a unique name to identify the NBG in an Ethernet network. Domain Name Enter the domain name you want to give to the NBG. Administrator Inactivity Timer Type how many minutes a management session can be left idle before the session times out. The default is 5 minutes. After it times out you have to log in with your password again. Very long idle timeouts may have security risks. A value of "0" means a management session never times out, no matter how long it has been left idle (not recommended). Apply Click Apply to save your changes back to the NBG. Reset Click Reset to return to the previously saved settings. 25.4 Password Screen It is strongly recommended that you change your NBG's password. If you forget your NBG's password (or IP address), you will need to reset the device. See Section 25.8 on page 166 for details. Click Maintenance > Password. The screen appears as shown. Figure 124 Maintenance > Password The following table describes the labels in this screen. Table 77 Maintenance > Password LABEL DESCRIPTION Password Setup Change your NBG's password (recommended) using the fields as shown. Old Password Type the default password or the existing password you use to access the system in this field. New Password Type your new system password (up to 30 characters). Note that as you type a password, the screen displays an asterisk (*) for each character you type. Retype to Confirm Type the new password again in this field. Apply Click Apply to save your changes back to the NBG. Reset Click Reset to begin configuring this screen afresh. NBG6515 User's Guide 161

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249

Chapter 25 Maintenance
NBG6515 User’s Guide
161
The following table describes the labels in this screen.
25.4
Password Screen
It is strongly recommended that you change your NBG's password.
If you forget your NBG's password (or IP address), you will need to reset the device. See
Section
25.8 on page 166
for details.
Click
Maintenance
>
Password
. The screen appears as shown.
Figure 124
Maintenance > Password
The following table describes the labels in this screen.
Table 76
Maintenance > General
LABEL
DESCRIPTION
System Setup
System Name
System Name is a unique name to identify the NBG in an Ethernet network.
Domain Name
Enter the domain name you want to give to the NBG.
Administrator
Inactivity Timer
Type how many minutes a management session can be left idle before the
session times out. The default is 5 minutes. After it times out you have to log in
with your password again. Very long idle timeouts may have security risks. A
value of "0" means a management session never times out, no matter how long
it has been left idle (not recommended).
Apply
Click
Apply
to save your changes back to the NBG.
Reset
Click
Reset
to return to the previously saved settings.
Table 77
Maintenance > Password
LABEL
DESCRIPTION
Password Setup
Change your NBG’s password (recommended) using the fields as shown.
Old Password
Type the default password or the existing password you use to access the system in this
field.
New Password
Type your new system password (up to 30 characters). Note that as you type a password,
the screen displays an asterisk (*) for each character you type.
Retype to
Confirm
Type the new password again in this field.
Apply
Click
Apply
to save your changes back to the NBG.
Reset
Click
Reset
to begin configuring this screen afresh.