ZyXEL NBG6515 User Guide - Page 18

Connection Type: DHCP

Page 18 highlights

Chapter 2 Connection Wizard Figure 4 Detecting your Internet Connection Type If the wizard does not detect a connection type, you must select one from the drop-down list box. Check with your ISP to make sure you use the correct type. Note: If you get an error message, check your hardware connections. Make sure your Internet connection is up and running. The following screen depends on your Internet connection type. Enter the details provided by your Internet Service Provider (ISP) in the fields (if any). Figure 5 Internet Connection Type Your NBG detects the following Internet Connection type. Table 3 Internet Connection Type CONNECTION TYPE DESCRIPTION Static IP Select the Static IP if an administrator assigns the IP address of your computer. DHCP Select the DHCP (Dynamic Host Configuration Protocol) option when the WAN port is used as a regular Ethernet. PPPoE Select the PPPoE (Point-to-Point Protocol over Ethernet) option for a dial-up connection. PPTP Select the PPTP (Point-to-Point Tunneling Protocol) option for a dial-up connection, and your ISP gave you an IP address and/or subnet mask. Note: PPTP will be supported in the next firmware version. 2.3.1 Connection Type: DHCP Choose DHCP as the Internet Connection Type when the WAN port is used as a regular Ethernet. Click Next. NBG6515 User's Guide 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249

Chapter 2 Connection Wizard
NBG6515 User’s Guide
18
Figure 4
Detecting your Internet Connection Type
If the wizard does not detect a connection type, you must select one from the drop-down list box.
Check with your ISP to make sure you use the correct type.
Note: If you get an error message, check your hardware connections. Make sure your
Internet connection is up and running.
The following screen depends on your Internet connection type. Enter the details provided by your
Internet Service Provider (ISP) in the fields (if any).
Figure 5
Internet Connection Type
Your NBG detects the following Internet Connection type.
2.3.1
Connection Type: DHCP
Choose
DHCP
as the
Internet Connection Type
when the WAN port is used as a regular
Ethernet. Click
Next
.
Table 3
Internet Connection Type
CONNECTION
TYPE
DESCRIPTION
Static IP
Select the
Static IP
if an administrator assigns the IP address of your computer.
DHCP
Select the
DHCP
(Dynamic Host Configuration Protocol) option when the WAN port is used
as a regular Ethernet.
PPPoE
Select the
PPPoE
(Point-to-Point Protocol over Ethernet) option for a dial-up connection.
PPTP
Select the
PPTP
(Point-to-Point Tunneling Protocol)
option for a dial-up connection, and
your ISP gave you an IP address and/or subnet mask.
Note: PPTP will be supported in the next firmware version.