ZyXEL NBG6515 User Guide - Page 46
Wireless, Security
View all ZyXEL NBG6515 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Chapter 6 Easy Mode The following table describes the general wireless LAN labels in this screen. Table 22 Wireless Security LABEL Wireless Radio Wireless Network Name (SSID) Security Mode DESCRIPTION Select the wireless radio to set its security setting. (Service Set IDentity) The SSID identifies the Service Set with which a wireless station is associated. Wireless stations associating to the access point (AP) must have the same SSID. Enter a descriptive name (up to 32 keyboard characters) for the wireless LAN. Select WPA-PSK or WPA2-PSK to add security on this wireless network. The wireless clients which want to associate to this network must have same wireless security settings as this device. After you select to use a security, additional options appears in this screen. Select No Security to allow any client to connect to this network without authentication. Wireless Password This field appears when you choose wither WPA-PSK or WPA2-PSK as the security mode. Type a pre-shared key from 8 to 63 case-sensitive keyboard characters. Verify Password Type the password again to confirm. Apply Click Apply to save your changes back to the NBG. Cancel Click Cancel to close this screen. WPS Click this to configure the WPS screen. You can transfer the wireless settings configured here (Wireless Security screen) to another wireless device that supports WPS. 6.6.7 WPS Use this screen to add a wireless station to the network using WPS. Click WPS in the Wireless Security to open the following screen. Figure 37 Wireless Security: WPS NBG6515 User's Guide 46