3Ware 9550SXU-16ML User Guide - Page 61
Add the following line to, If you intend to bundle the firmware image with the driver, add
UPC - 693494971606
View all 3Ware 9550SXU-16ML manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Driver Installation Under FreeBSD 7 At the loader prompt, run lsdev to make sure the floppy drive has been discovered. 8 Run load disk0:twa.ko (assuming disk0 is the floppy drive) 9 Run boot. The system should now be able to boot. 10 After the system boots up, change the kernel build infrastructure to include the 3ware driver sources. a Change to the following directory: cd /usr/src/sys/i386/conf b Copy the configuration file to a custom file. For example, if the configuration file is GENERIC, type cp GENERIC custom. c Edit the custom file and add the lines shown below under RAID controllers device twa # 3ware Escalade 9000 series d Save the file. e Change to the following directory: cd /sys/conf f Edit the file "files.i386" and add the lines shown below dev/twa/tw_cl_fwimg.c optional twa dev/twa/w_cl_init.c optional twa dev/twa/tw_cl_intr.c optional twa dev/twa/tw_cl_io.c optional twa dev/twa/tw_cl_misc.c optional twa dev/twa/tw_osl_cam.c optional twa dev/twa/tw_osl_freebsd.c optional twa g Save the file. h Add the following line to Makefile.i386 CFLAGS+=-I/sys/dev/twa i If you intend to bundle the firmware image with the driver, add the following line to /sys/conf/options: TWA_FIRMWARE_FLASH opt_twa.h and the following line to your kernel configuration file ("custom" in the example above): options TWA_FLASH_FIRMWARE j If you intend to enable printing of debug messages in the driver, add the following line to /sys/conf/options: TWA_DEBUG opt_twa.h and the following line to your kernel configuration file ("custom" in the example above): options TWA_DEBUG= www.3ware.com 51