Brother International Quattro 2 6700D Users Manual - English - Page 101
Dart Seam, Gathering
View all Brother International Quattro 2 6700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Dart Seam SEWING THE STITCHES e Iron the dart to one side so that it is flat. a Select and attach presser foot "J". b Sew dart a reverse stitch at the beginning of and then sew from the wide end to the the other end without stretching the fabric. * If automatic reinforcement stitching is preset, a reinforcement stitch will automatically be sewn at the beginning of sewing. Gathering Use on waists of skirts, sleeves of shirts, etc. 3 a Select a straight foot "J". stitch and attach presser Utility Stitches a Basting c Cut the thread at (approx. 1-15/16 the end leaving 50 mm inches), and then tie both ends together. * Do not sew a reverse stitch at the end. d Insert the ends of the thread with a hand sewing needle. into the dart b Set the stitch length to 4.0 mm (approx. 3/16 inch) and the thread tension to approximately 2.0 (weaker tension). * If you press after pressing and then , the stitch length will be set automatically to 4.0 mm (approx. 3/16 inch) and the thread tension will be automatically set to 2.0. 99