Brother International Quattro 2 6700D Users Manual - English - Page 18

NAMES OF MACHINE PARTS AND THEIR FUNCTIONS Using the Flat Bed Attachment Pull the top of the flat bed attachment to open the accessory compartment. b Place the lid on top of the case so that the notches in the lid align with the tabs on the case, and then slide the bar on each side back to the center of the accessory case. Using the Accessory Case ■ Opening the Accessory Case Fully slide the bar on each side of the accessory case, and then lift off the lid to open the case. The case can only be opened or locked correctly if both bars are slid in the same direction. a Bars ■ Using the Accessory Trays Two presser foot storage trays are stored in the included accessory case. One is for presser feet for utility sewing, and the other is for presser feet for embroidery and machine quilting. a Bars ■ Closing the Accessory Case a Fully slide the bar accessory case lid on each side of the to align the notches in the lid with the notches in the bars. a For presser feet for utility sewing b For presser feet for embroidery and machine quilting For your convenience, a presser foot storage tray can be stored in the accessory compartment of the flat bed attachment. 16