Brother International Quattro 2 6700D Users Manual - English - Page 189

Attaching Embroidery Foot "W" BEFORE EMBROIDERING d Push the black button on the presser holder and remove the presser foot. foot Press → → → → in this order to display a video example of attaching embroidery foot "W" (see page 46). Follow the steps explained below to complete the operation. CAUTION • When attaching a presser foot, always press on the screen. You may accidentally press the "Start/Stop" button and possibly cause injury. • Be sure to use embroidery foot "W" when doing embroidery. Using another presser foot may cause the needle to strike the presser foot, causing the needle to bend or break and possibly cause injury. a Press the "Needle the needle. Position" button to raise a Black button b Presser foot holder → Remove the presser foot from the presser foot holder. e Use the included screwdriver to loosen screw of the presser foot holder, then the remove the presser foot holder. 5 Embroidery b Press . → The entire screen becomes white, and all keys and operation buttons are locked. c Raise the presser foot lever. a Screwdriver b Presser foot holder c Presser foot holder screw → Remove the presser foot holder. f Position embroidery foot "W" on the presser foot bar so that the arm of embroidery foot "W" is behind the needle holder and the wiper is behind the needle. a Arm b Needle holder c Presser foot holder screw d Wiper 187