Brother International Quattro 2 6700D Users Manual - English - Page 148
Zipper Insertion, CAUTION
View all Brother International Quattro 2 6700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
SEWING THE STITCHES Zipper Insertion ■ Centered Zipper Use for bags and other such applications. d Remove presser foot "J". Align the right side of the pin in zipper foot "I" with the presser foot holder, and attach the zipper foot. a Select . Memo • For details on each stitch, refer to the "STITCH SETTING CHART" at the end of this manual. Note • Make sure you sew using the middle needle position. b Attach presser foot "J" and sew straight stitches up to the zipper opening. Change to a basting stitch (see page 98) and sew to the top of the fabric. a Basting stitches b Reverse stitches c End of zipper opening d Wrong side c Press the seam allowance open the zipper with a basting stitch and attach in the middle of each side of the zipper tape. a Right b Left c Needle drop position CAUTION • When using zipper foot "I", make sure the straight stitch, middle needle position is selected. Rotate the handwheel toward you (counterclockwise) to make sure the needle does not strike the presser foot. If another stitch is selected, the needle will strike the presser foot, causing the needle to break and possibly causing injury. e Topstitch 7 to 10 mm (approx. 1/4 3/8 inch) from the seamed edge of to the fabric, then remove the basting. a Basting stitches b Zipper c Wrong side CAUTION • Make sure the needle does not strike the zipper during sewing. If the needle strikes the zipper, the needle may break, leading to injury. 146