Brother International Quattro 2 6700D Users Manual - English - Page 119
right hand, and tighten the presser foot
View all Brother International Quattro 2 6700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
SEWING THE STITCHES c Press to set the machine to free motion sewing mode. d Remove 66). the presser foot holder (see page e Attach free motion quilting foot "C" at the front with the presser foot holder screw aligned with the notch in the quilting foot. a Presser foot holder screw 3 b Notch Note • Make sure that the quilting foot is attached properly and not slanted. Utility Stitches → The key appears as , the quilting foot is raised to the necessary height, and then the feed dogs are lowered for free motion sewing. f Hold the quilting foot in place with your right hand, and tighten the presser foot holder screw using the screwdriver with your left hand. a a Presser foot holder screw CAUTION • Be sure to securely tighten the screws with the included screwdriver. Otherwise, the needle may touch the quilting foot, causing it to bend or break. g Use and both then hands to stretch the move the fabric at a fabric taut, consistent pace in order to sew uniform stitches roughly 2.0-2.5 mm (approx. 1/16 - 3/32 inch) in length. a Free motion quilting foot "C" → When stitch Q-01 or 1-31 is selected, free motion quilting foot "C" is indicated in the upper-left corner of the screen. a Stitch 117