Brother International Quattro 2 6700D Users Manual - English - Page 149
Inserting a Side Zipper
View all Brother International Quattro 2 6700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
■ Inserting a Side Zipper Use for side zippers in skirts or dresses. a Select . SEWING THE STITCHES e Align the right side of the pin in zipper foot "I" with the presser foot holder, and attach the presser foot. Note • Make sure you sew using the middle needle position. b Attach presser foot "J" and sew straight stitches up to the zipper opening. Change to a basting stitch and sew to the top of the fabric. a Right 3 b Left c Needle drop position Utility Stitches a Reverse stitches b Wrong side of fabric c Basting stitches d End of zipper opening c Press the seam allowance open and align the folded hem along the teeth of the zipper, while maintaining 3 mm (approx. 1/8 inch) of sewing space. CAUTION • When using zipper foot "I", make sure the straight stitch, middle needle position is selected. Rotate the handwheel toward you (counterclockwise) to make sure the needle does not strike the presser foot. If another stitch is selected, the needle will strike the presser foot, causing the needle to break and possibly causing injury. f Set the presser foot 1/8 inch) margin. in the 3 mm (approx. g Starting from the end of sew to a point about 50 the zipper opening, mm (approx. 2 inches) from the edge of the fabric, then stop the machine. h Pull down the zipper slider, then sewing to the edge of the fabric. continue a Zipper pull tab b Wrong side of fabric c Zipper teeth d End of zipper opening e 3 mm (approx. 1/8 inch) d Remove presser foot "J". a 50 mm (approx. 2 inches) b 3 mm (approx. 1/8 inch) CAUTION • Make sure the needle does not strike the zipper during sewing. If the needle strikes the zipper, the needle may break, leading to injury. 147