Brother International Quattro 2 6700D Users Manual - English - Page 238
Using the Thread Trimming, Function JUMP STITCH TRIM
View all Brother International Quattro 2 6700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 238 highlights
MAKING EMBROIDERY ADJUSTMENTS Using the Thread Trimming Function (JUMP STITCH TRIM) b Press to turn off the thread trimming function. The thread trimming function will automatically trim any excess thread jumps within the color. This function is initially turned on. To turn this function off, press key and then . This function can be turned on or off during embroidering. * Your customized setting remains after turning the machine off and on. a Jump stitch Note • When this function is turned on, use the included ball point needle 75/11 for embroidering patterns with short jump stitches such as alphabet characters. Using other needles may cause the thread to break. → The key will display as * The machine will not trim the thread before moving to the next stitching. ■ Selecting the Length of Jump Stitch Not to Trim When the thread trimming function is turned on, you can select the length of the jump stitch not to trim the thread. This function can be turned on or off during embroidering. Select a setting from 5 mm to 50 mm in 5 mm increments. * Your customized setting remains after turning the machine off and on. Press or to select the length of jump stitch. For example: Press to select 25 mm (1 inch) and the machine will not trim a jump stitch of 25 mm or less before moving to the next stitching. a Press . Note • If design has many trims it is recommended to select a higher jump stitch trim setting in order to reduce the amount of excess tails on backside of fabric. • The higher number of the jump stitch length selected, the fewer number of times the machine will trim. In this case, more jump stitches remain on the surface of the fabric. 236