Brother International Quattro 2 6700D Users Manual - English - Page 322
Start Embroidering, CAUTION
View all Brother International Quattro 2 6700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 322 highlights
CREATING BOBBIN WORK (EMBROIDERY) Start Embroidering a Hoop the fabric so the right side of the fabric is facing down with the stabilizer lying on the top. Use an embroidery frame that fits the size of the pattern and then attach the frame to the machine. These patterns are embroidered from the wrong side of the fabric so technically you are working in "reverse" of normal embroidering. e Using the presser presser foot. foot lever, raise the f To bring the bobbin thread above fabric, rotate the handwheel the counterclockwise while holding the upper thread. g As shown below, pull the upper thread pull the bobbin thread up through the to fabric. a Wrong side of fabric CAUTION • Always use a stabilizer material for embroidery. Otherwise, the needle may break and cause injuries. Not using a stabilizer material may result in a poor finish to your project. b It is necessary to move to the beginning of stitching so press , and then press . a Upper thread b Bobbin thread Memo • If the bobbin thread cannot be pulled up, use an awl to create small hole to help pull bobbin thread to surface. → The embroidery frame moves to the beginning of stitching. c Press . d Press . → The screen changes, and all keys and operation buttons are locked. 320