Brother International Quattro 2 6700D Users Manual - English - Page 210

CONFIRMING THE PATTERN POSITION CONFIRMING THE PATTERN POSITION The pattern is normally positioned in the center of the embroidery frame. If the pattern needs to be repositioned for better placement on the garment, you can check the layout before starting embroidery. Aligning the Embroidering Position Using the Built-In Camera b Hoop the fabric. The camera built into this machine can be used to easily align the embroidering position. This is useful for patterns which need to be embroidered in a particular position as shown below. Note • When hooping the fabric in the embroidery frame, make sure that the embroidery pattern will fit within the embroidering area of the frame being used. a Use a chalk pencil to draw a cross desired embroidering location. at the a Embroidering area b Embroidery pattern size c Chalk pencil mark a Chalk pencil mark * Display the grid lines or cross grid lines in the pattern display area to check the pattern orientation. (Refer to "Changing the Embroidery Frame Display" on page 238.) 208