Brother International Quattro 2 6700D Users Manual - English - Page 190

BEFORE EMBROIDERING g Hold the embroidery foot your right hand, and then in place with use the included screwdriver to securely tighten the presser foot holder screw. CAUTION • Use the included screwdriver to firmly tighten the screw of the presser foot holder. If the screw is loose, the needle may strike the presser foot and possibly cause injury. h Press buttons. to unlock all keys and → All keys and operation buttons are unlocked, and the previous screen is displayed. Attaching the Embroidery Unit Note • You can also sew utility/decorative stitches with the embroidery unit attached. Touch and . The feed dog will automatically raise for utility and decorative stitching. • Be sure to turn off the power before installing the embroidery unit. Otherwise, the machine may be damaged. • Do not touch the inner connector of the embroidery unit. The pins on the embroidery unit connection may be damaged. • Do not apply strong force to the embroidery unit carriage or pick up the unit by the carriage. Otherwise, the embroidery unit may be damaged. • Store the embroidery unit in the proper storage case. a Turn the main power to OFF, the flat bed attachment. and remove Press → → → → in this order to display a video example of attaching the embroidery unit (see page 46). Follow the steps explained below to complete the operation. ■ About the Embroidery Unit b Insert the embroidery unit connection into the machine connection port. The spring hinge on the connection port cover will allow easy access to the port. Push lightly on the connection port cover until the unit clicks into place. CAUTION • Do not move the machine with the embroidery unit attached. The embroidery unit could fall off and cause injury. • Keep your hands and foreign objects away from the embroidery carriage and frame when the machine is embroidering. Otherwise, injury may result. • To avoid distorting your embroidery design, do not touch the embroidery carriage and frame when the machine is embroidering. 188 a Embroidery unit connection b Machine connection port Note • Be sure there is no gap between the embroidery unit and the sewing machine. If there is a gap, the embroidery patterns will not embroider with the correct registration. • Do not push on the carriage when installing the embroidery unit onto the machine. Moving the carriage may damage the embroidery unit.