Brother International Quattro 2 6700D Users Manual - English - Page 150

SEWING THE STITCHES i Close the zipper, turn sew a basting stitch. the fabric over, and n Open seam. the zipper and sew the rest of the a Front of the skirt (wrong side of fabric) b Basting stitches c Front of the skirt (right side of fabric) d Back of the skirt (right side of fabric) j Remove the presser foot, and reattach it so that the left side of the pin is attached to the presser foot holder. * When sewing the left side of the zipper, the needle should drop on the right side of the presser foot. When sewing the right side of the zipper, the needle should drop on the left side of the presser foot. a Basting stitches b 7 to 10 mm (approx. 1/4 inch to 3/8 inch) c Reverse stitches d 50 mm (approx. 2 inches) Edge Sewing Using the built-in camera, the width of the area from the edge of the fabric to the stitching line can be measured and set for edge sewing. This function can be used when the edge of the fabric is straight or a gentle curve. a Right b Left c Needle drop position k Set the fabric so that the left edge of the presser foot touches the edge of the zipper teeth. l Sew reverse stitches at the top zipper, then continue sewing. of the m Stop sewing about 2 inches) from the 50 mm (approx. edge of the fabric, leave the needle in the fabric, and remove the basting stitches. a Straight b Curved 148