Brother International Quattro 2 6700D Users Manual - English - Page 155
Example
View all Brother International Quattro 2 6700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
j While checking the screen for the distance from the fabric edge to the edge sewing position, move the fabric to the desired position. * The starting point of the fabric edge indicator line shows the position for the start of sewing. The actual position for the start of sewing is directly below the needle and parallel to the starting point. SEWING THE STITCHES Note • Distances between 1.5 mm (about 1/16 inch) and 38.5 mm (about 1-1/2 inches) can be measured. The distance is displayed in the screen in 0.5 mm (about 1/64 inch) increments. • The distance is displayed in millimeters. However, depending on the measurement setting, it can also be displayed in inches. • If "-_- mm" appears as the distance and no inch measurement is displayed, the built-in camera is not able to detect the edge of the fabric. • When a straight stitch is selected, use the scale on the edge sewing sheet as a guide for positioning the fabric for edge sewing. 3 a Utility Stitches a Distance from edge of fabric Example: When a straight stitch is selected (example: ) a Scale on the edge sewing sheet k Lower the presser foot. → The distance from the edge of the fabric to the seam is set. Memo • If the knee lifter is used to lower the presser foot, the fabric can be held in place with both hands so the fabric does not move when the presser foot is lowered. a Middle needle position b Stitching c Edge of fabric d Width of edge sewing 153