Brother International Quattro 2 6700D Users Manual - English - Page 361

STITCH SETTING CHART STITCH SETTING CHART The following chart shows information for each utility stitch concerning applications, stitch lengths, stitch widths, and whether or not the twin needle mode can be used. Note • Quilting foot "C" is used when the straight stitch needle plate is attached to the machine. Refer to "Using Free motion Quilting Foot "C"" on page 116. Stitch Stitch name Straight stitch (Left) Straight stitch (Left) Straight stitch (Middle) Straight stitch (Middle) Triple stretch stitch Stem stitch Decorative stitch Basting stitch Zigzag stitch Zigzag stitch Zigzag stitch (right) Zigzag stitch (left) 2 steps elastic zigzag Presser foot Applications Stitch width [mm (inch)] Auto. Manual Stitch length [mm (inch)] Auto. Manual Twin needle General sewing, gather, pintuck, etc. Reverse stitch is sewn while pressing "Reverse/ Reinforcement Stitch" button. General sewing, gather, pintuck, etc. Reinforcement stitch is sewn while pressing "Reverse/Reinforcement Stitch" button. General sewing, gather, pintuck, etc. Reverse stitch is sewn while pressing "Reverse/ Reinforcement Stitch" button. General sewing, gather, pintuck, etc. Reinforcement stitch is sewn while pressing "Reverse/Reinforcement Stitch" button. General sewing for reinforcement and decorative topstitching Reinforced stitching, sewing and decorative applications 0.0 (0) 0.0 (0) 3.5 (1/8) 3.5 (1/8) 0.0 (0) 1.0 (1/16) 0.0 - 7.0 (0 - 1/4) 0.0 - 7.0 (0 - 1/4) 0.0 - 7.0 (0 - 1/4) 0.0 - 7.0 (0 - 1/4) 0.0 - 7.0 (0 - 1/4) 1.0 - 3.0 (1/16 - 1/8) 2.5 0.2 - 5.0 OK (3/32) (1/64 - 3/16) ( J ) 2.5 0.2 - 5.0 OK (3/32) (1/64 - 3/16) ( J ) 2.5 0.2 - 5.0 OK (3/32) (1/64 - 3/16) ( J ) 2.5 0.2 - 5.0 OK (3/32) (1/64 - 3/16) ( J ) 2.5 1.5 - 4.0 OK (3/32) (1/16 - 3/16) ( J ) 2.5 1.0 - 4.0 OK (3/32) (1/16 - 3/16) ( J ) Decorative stitching, top stitching 0.0 0.0 - 7.0 2.5 1.0 - 4.0 OK (0) (0 - 1/4) (3/32) (1/16 - 3/16) ( J ) Basting For overcasting, mending. Reverse stitch is sewn while pressing "Reverse/ Reinforcement Stitch" button. For overcasting, mending. Reinforcement stitch is sewn while pressing "Reverse/ Reinforcement Stitch" button. Start from right needle position, zigzag sew at left. 0.0 (0) 3.5 (1/8) 0.0 - 7.0 (0 - 1/4) 0.0 - 7.0 (0 - 1/4) 20 (3/4) 5 - 30 (3/16 - 1-3/ NO 16) 1.4 0.0 - 4.0 OK (1/16) (0 - 3/16) ( J ) 3.5 (1/8) 0.0 - 7.0 (0 - 1/4) 1.4 (1/16) 0.0 - 4.0 OK (0 - 3/16) ( J ) 3.5 (1/8) 2.5 - 5.0 1.4 0.3 - 4.0 OK (3/32 - 3/16) (1/16) (1/64 - 3/16) ( J ) Start from left needle position, zigzag sew at right. 3.5 (1/8) 2.5 - 5.0 1.4 0.3 - 4.0 OK (3/32 - 3/16) (1/16) (1/64 - 3/16) ( J ) Overcasting (medium weight and stretch fabrics), tape and elastic 5.0 (3/16) 1.5 - 7.0 (1/16 - 1/4) 1.0 0.2 - 4.0 OK (1/16) (1/64 - 1/16) ( J ) 359