Brother International Quattro 2 6700D Users Manual - English - Page 156
and 3/4 inch from the edge of
View all Brother International Quattro 2 6700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
SEWING THE STITCHES l Press the sewing. "Start/Stop" button to start edge → Sewing starts with the set distance to the edge of the fabric maintained. * While sewing, use the red scale marks on the vertical stitch alignment foot "V" as a guide to keep a fixed distance from the edge of the fabric. m When sewing is between 1 and 2 cm (about 3/8 and 3/4 inch) from the edge of the fabric, sewing stops automatically and the following message appears. To stop sewing, press . * When this message appears, edge sewing (with the seam wizard function) is canceled. a Red scale marks * When sewing starts, a still image from the built-in camera is displayed. Note • While sewing, do not place anything, including your hands, within 2 mm (about 1/ 16 inch) from the edge of the fabric, otherwise the edge of the fabric cannot be detected correctly. When guiding the fabric with your hands, place them outside of the object-free area and more than 2 mm (about 1/16 inch) from the edge of the fabric. Note • To continue sewing to the edge of the fabric, do not press when the message shown above appears. With the above message displayed, press the "Start/Stop" button to sew. Memo • When edge sewing is finished, store the edge sewing sheet affixed to the transparent sheet in order to prevent it from collecting dust. a Approximately 2 mm (about 1/16 inch) b Fabric c Edge of fabric 154