Brother International Quattro 2 6700D Users Manual - English - Page 74

SEWING SEWING CAUTION • To avoid injury, pay special attention to the needle while the machine is in operation. Keep your hands away from moving parts while the machine is in operation. • Do not stretch or pull the fabric during sewing. Doing so may lead to injury. • Do not use bent or broken needles. Doing so may lead to injury. • Do not attempt to sew over basting pins or other objects during sewing. Otherwise, the needle may break and cause injury. • If stitches become bunched, lengthen the stitch length setting before continuing sewing. Otherwise, the needle may break and cause injury. Sewing a Stitch a Turn the main power to ON and press to display the utility stitches, and push the "Needle Position" button to raise the needle. b Press the key of the stitch you want to sew. c Install the presser foot ("CHANGING PRESSER FOOT" on page 65). THE CAUTION • Always use the correct presser foot. If the wrong presser foot is used, the needle may strike the presser foot and bend or break, possibly resulting in injury. Refer to page 359 for presser foot recommendations. d Set the fabric under the the fabric and thread in presser foot. Hold your left hand, and rotate the handwheel to set the needle in the sewing start position. → The symbol of the correct presser foot will be displayed in the upper left corner of the LCD screen. Memo • The black button on the left side of presser foot "J" should be pressed only if the fabric does not feed or when sewing thick seams (see page 76). Normally, you can sew without pressing the black button. e Lower the presser foot. * You do not have to pull up the bobbin thread. 72