Brother International Quattro 2 6700D Users Manual - English - Page 61
Press the Presser Foot Lifter button
View all Brother International Quattro 2 6700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
i Pass the thread through the needle bar thread guide (marked "6") by holding the thread with both hands and guiding it as shown in the illustration. UPPER THREADING l Pull the thread up through the to cut the thread, as shown in thread the cutter illustration. 1 Getting Ready a Needle bar thread guide j Press the "Presser Foot lower presser foot. Lifter" button to a Thread cutter Note • When using thread that quickly winds off the spool, such as metallic thread, it may be difficult to thread the needle if the thread is cut. Therefore, instead of using the thread cutter, pull out about 80 mm (approx. 3 inches) of thread after passing it through the thread guide disks (marked "7"). k Pass the thread through the thread guide disks (marked "7"). Make sure that the thread passes through the groove in the thread guide. a 80 mm (approx. 3 inches) or more m Press the "Automatic Threading" button to have the machine automatically thread the needle. a Groove in thread guide → The thread passes through the eye of the needle. Memo • When the "Automatic Threading" button is pressed, the presser foot will be automatically lowered. After threading is finished, the presser foot moves back to the position before the "Automatic Threading" button was pressed. 59