Brother International Quattro 2 6700D Users Manual - English - Page 52
thread to the right to cut the thread
View all Brother International Quattro 2 6700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
LOWER THREADING g Wind the thread clockwise bobbin 5-6 times. around the j Press . → Bobbin winding starts automatically. The bobbin stops rotating when bobbin winding is completed. The bobbin winding switch will automatically return to its original position. h Pass the end of the thread through the guide slit in the bobbin winder seat, and pull the thread to the right to cut the thread with the cutter. a Guide slit (with built-in cutter) b Bobbin winder seat CAUTION • Be sure to follow the process described. If the thread is not cut with the cutter, and the bobbin is wound, when the thread runs low it may tangle around the bobbin and cause the needle to break. i Set the bobbin winding switch until it clicks into place. to the left, a Bobbin winding switch Memo • Sliding the bobbin winding switch to the left switches the machine into bobbin winding mode. → The bobbin winding window appears. 50 Note • changes to while the bobbin is winding. • Stay near the machine while winding the bobbin to make sure the bobbin thread is being wound correctly. If the bobbin thread is wound incorrectly, press immedi- ately to stop the bobbin winding. • The sound of winding the bobbin with stiff thread, such as nylon thread for quilting, may be different from the one produced when winding normal thread; however, this is not a sign of a malfunction. Memo • You can change the winding speed by pressing (to decrease) or (to increase) in the bobbin winding window. • Press to minimize the bobbin winding window. Then, you can perform other operations, such as selecting a stitch or adjusting the thread tension, while the bobbin is being wound. • Press (in top right of the LCD screen) to display the bobbin winding window again.