Brother International Quattro 2 6700D Users Manual - English - Page 344

ADJUSTING THE SCREEN ADJUSTING THE SCREEN Adjusting the Brightness of the Screen Display If the screen is not looks very clear under certain situation, you can adjust the brightness of the screen display. a Press . → The Sewing settings screen appears. b Press . → The General settings screen appears. c Display settings 4/8 (page screen. 4 of 8) of the General d Press or to adjust the brightness of the screen display. a Holding your finger on the screen, turn the main power switch to OFF and back to ON. → The touch panel adjustment screen is displayed. b Using the included touch pen, lightly the center of each +, in order from 1 touch to 5. Note • Only use the included touch pen to touch the screen. Do not use a mechanical pencil, pin, or other sharp object. Do not press too hard on the screen. Otherwise, damage may result. +1 +4 +5 * The screen appears dim as the number on the settings screen decreases. The screen appears brighter as the number increases. +2 +3 c Turn back the main to ON. power to OFF, then turn it Note • If you finish the screen adjustment and the screen still does not respond, or if you cannot do the adjustment, contact your authorized dealer. Touch Panel is Malfunctioning If the screen does not respond correctly when you touch a key (the machine does not perform the operation or performs a different operation), follow the steps below to make the proper adjustments. 342