Brother International Quattro 2 6700D Users Manual - English - Page 272
Changing the Pattern Size While
View all Brother International Quattro 2 6700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 272 highlights
EDITING PATTERNS Moving the Pattern For details on moving the pattern, refer to "Moving the Pattern" on page 240. Rotating the Pattern For details on rotating the pattern, refer to "Rotating the Pattern" on page 242. Changing the Size of the Pattern For details on changing the size of the pattern, refer to "Changing the Size of the Pattern" on page 241. Changing the Pattern Size While Maintaining the Desired Thread Density (Stitch Recalculator) In the embroidery edit screen, the size of the pattern can be changed while the desired thread density is maintained. With this function, the pattern will be enlarged or reduced at a larger ratio than with normal pattern resizing. b Select the pattern to be resized, and then press . Note • This function cannot be used with alphabet character patterns, frame patterns or border patterns. However, a border pattern can be edited after this function has been used. • Patterns with a large number of stitches (about 100,001 or more) cannot be resized while maintaining a desired thread density. The maximum limit for the number of stitches differs depending on the data size of pattern. • If this function is used, thread density is maintained while the pattern is enlarged/ reduced. However, the needle drop point pattern is not entirely maintained. Use the normal resizing mode depending on the results of trial embroidering. c Press . d Press mode ( to enter Stitch Recalculator ). Note • Be sure to sew trial embroidery using same fabric and threads as project in order to check the sewing results. a Press . Memo • Stitch Recalculator cannot be used if the key appears as . 270