Brother International Quattro 2 6700D Users Manual - English - Page 133

b Select . Memo • For details on each stitch, refer to the "STITCH SETTING CHART" at the end of this manual. c Attach presser foot of the fabric facing "N". With the right side up, sew one edge of the open area. SEWING THE STITCHES ■ Hemstitching (3) (Drawn Work (2)) a Pull out several threads from both sides of the 4 mm (approx. 3/16 inch) area which are not yet open. * Pull out four threads, leave five threads, and then pull out four threads. The width of five threads is approximately 4 mm (approx. 3/16 inch) or less. 3 Utility Stitches a Approx. 4 mm (approx. 3/16 inch) or less b Four threads (pull out) c Five threads (leave) d Press stitch. to create a mirror image of the e Match beginning needle drop points on the opposite edge of the open area to keep the stitching symmetrical. b Select . Memo • For details on each stitch, refer to the "STITCH SETTING CHART" at the end of this manual. c Sew the decorative stitch in the the five threads created above. center of Memo • A wing needle can be used for Hemstitching (3). 131