Brother International Quattro 2 6700D Users Manual - English - Page 191

c Turn the main power to ON. → The following message will appear. d Press . BEFORE EMBROIDERING c Hold down the release button, and pull the embroidery unit away from the machine. → The carriage will move to the initialization position. ■ Removing the Embroidery Unit a Press either or , then press . → The carriage will move to the removal position. CAUTION • Always remove the embroidery frame before pressing . Otherwise, the frame may strike the embroidery foot, and possibly cause injury. • The embroidery unit will not fit in the storage case if this step is not done. b Turn the main power to OFF. Note • Be sure to turn off the machine before removing the embroidery unit, otherwise damage to the machine may result. a Release button CAUTION • Do not carry the embroidery unit by holding 5 the release button compartment. Embroidery 189