Brother International Quattro 2 6700D Users Manual - English - Page 110
feed direction.
View all Brother International Quattro 2 6700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
SEWING THE STITCHES e Position the side cutter so that the side cutter pin is aligned with the notch in the presser foot holder, and then lower the presser foot. h Position the fabric so that the right side of the cut is on top of the guide plate and the left side of the cut is underneath the presser foot. a Notch in presser foot holder b Pin → The side cutter is attached. f Raise the presser foot and pull out a long section of the upper thread. Pass it below the presser foot and pull it out in the fabric feed direction. a Guide plate (lower knife) b Presser foot c Upper thread Memo • If the fabric is not positioned correctly, the fabric will not be cut. a Presser foot b Upper thread g Make a cut of approximately 20 (approx. 3/4 inch) in the fabric. mm a 20 mm (approx. 3/4 inch) 108