Brother International Quattro 2 6700D Users Manual - English - Page 312

PREPARING FOR BOBBIN WORK Upper Threading d Remove the bobbin case. a Install a needle appropriate for thread and fabric to be used. the upper For details on installing the needle, refer to "CHANGING THE NEEDLE" on page 67. b Attach the presser foot. → "CHANGING THE PRESSER FOOT" on page 65 → "Using Free motion Quilting Foot "C"" on page 116 → "Using free motion Open Toe Quilting Foot "O"" on page 118 → "Echo Quilting Using the Free Motion Echo Quilting Foot "E"" on page 119 → "Attaching Embroidery Foot "W"" on page 187 c Thread the machine with the upper thread. For details on threading the machine, refer to "Upper Threading" on page 57. a Bobbin case e Use the cleaning brush included with the machine or a vacuum cleaner to remove any lint and dust from the race and its surrounding area. Preparing the Bobbin Thread In order to create bobbin work, the bobbin case must be replaced with the one for bobbin work. Before creating bobbin work, clean the bobbin case and the race. a Raise the needle and presser turn off the machine. foot, and then b Remove the flat bed embroidery unit. attachment or c Grasp both sides of the needle plate cover, and then slide it toward you to remove it. a Cleaning brush b Race f Wipe the bobbin case free cloth to clean it. (gray) with a soft lint g Insert the bobbin case so that the S mark on the bobbin case aligns with the z mark on the machine. a a Needle plate cover b a b * Align the S and z marks. 310