Brother International Quattro 2 6700D Users Manual - English - Page 213

Display the Fabric While Aligning the Embroidering Position The fabric hooped in the embroidery frame can be displayed on the LCD so that the embroidery position can be easily aligned. Example: CONFIRMING THE PATTERN POSITION c Press . Note • When embroidery frame (small: H 2 cm × W 6 cm (H 1 inch × W 2-1/2 inches)) is installed, the built-in camera cannot be used to align the embroidering position. Install medium embroidery frame or larger. • For details on using thicker fabric such as quilting, refer to "Positioning the Pattern on Thick Fabric" (page 213). a Hoop the fabric in the embroidery frame, then attach the frame to the embroidery and machine. b Select the pattern, and then press . Note • Check page 8/8 of Settings screen to make sure the Fabric Thickness Sensor is turned off when using light to medium weight fabrics. d When the . following message appears, press → The embroidery frame moves so the fabric can be scanned. Memo • If you do not wish the upper thread to be scanned together with the fabric, scan the fabric without the needle threaded with the upper thread. Embroidery 5 211