Brother International Quattro 2 6700D Users Manual - English - Page 151

Note • Clean stitching cannot be sewn if this function is used when the edge of the fabric has corners as shown below. SEWING THE STITCHES b Attach "V". the vertical stitch alignment foot CAUTION • When edge sewing using the built-in camera, make sure that the room is evenly lit. If the brightness in the room changes while edge sewing, the built-in camera may not be able to detect the edge of the fabric. • The built-in camera detects the contrast between the fabric and the background. Therefore, observe the following precautions. • When edge sewing with the built-in camera, be sure to use the vertical stitch alignment foot "V". In order to maintain a fixed distance from the edge of the fabric, the needle will slightly move to either side, even when sewing with a straight stitch. If a different presser foot is used, it may be hit by the needle, causing the 3 needle to break or resulting in injuries. c Peel off the transparent sewing sheet. sheet of the edge Utility Stitches - If the edge of the fabric is fraying, cut off any excess fabric threads. - If the fabric has a complicated pattern, is sheer or is glossy, such as a vinyl material, the built-in camera may not be able to detect it correctly. • For best results, iron the fold when folding the edge of the fabric for edge sewing. • When "Width Control" on page 1/8 of the settings screen is set to "ON" or when "Needle Position - Stitch Placement" on page 3/8 is set to "ON", the built-in camera cannot be used with edge sewing. If either of these parameters are set to "ON", appears gray and cannot be selected. Before using the built-in camera for edge sewing, set "Width Control" and "Needle Position - Stitch Placement" in the settings screen to "OFF". a Select a stitch. * Edge sewing using the built-in camera cannot be used with patterns where appears in gray when the pattern is selected. 149