Brother International Quattro 2 6700D Users Manual - English - Page 125
free arm, make sure that the fabric feeds
View all Brother International Quattro 2 6700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
e Unfold the fabric with edge of fabric, and position the wrong side facing up. the 4 1 6 1 1 3 1 1 5 2 a Wrong side of fabric b Right side of fabric c Edge of fabric d Desired edge of hem e Basting point f Basting f Attach blind hem foot "R". SEWING THE STITCHES j Position the fabric with the edge of the folded hem against the guide of the presser foot, and then lower the presser foot lever. a Wrong side of fabric b Fold of hem c Guide k Adjust the stitch width until the needle slightly catches the fold of the hem. 3 Utility Stitches g Select or . a Needle drop point When you change the needle drop point, raise the needle, and then change the stitch width. h Remove the free-arm. flat bed attachment to use the i Slide the item that you wish to sew onto the free arm, make sure that the fabric feeds correctly, and then start sewing. a Stitch width Memo • Blind hem stitches cannot be sewn if the left needle drop point does not catch the fold. If the needle catches too much of the fold, the fabric cannot be unfolded and the seam appearing on the right side of the fabric will be very large, leaving an unattractive finish. If you experience either of these cases, follow the instructions below to solve the problem. a Free arm 123