Brother International Quattro 2 6700D Users Manual - English - Page 352

ERROR MESSAGES This message is displayed when the "Reverse/ Reinforcement Stitch" button is pushed while the embroidery unit is attached. This message is displayed when the foot controller is pressed while the embroidery unit is attached and machine is set up for embroidering. This message is displayed when the patterns you are editing take up too much memory, or if you are editing too many patterns for the memory. This message is displayed when a key on the LCD display is touched while the needle is in the down position. 350 This message is displayed when there are too many characters and the curved character configuration is impossible. This message is displayed when the machine is in embroidery mode, and the character pattern combination is too large to fit in the embroidery frame. This message is displayed when the machine is in embroidery mode and the combined character pattern is too large for the embroidery frame. You can rotate the pattern 90 degrees and continue combining characters. This message is displayed when the machine is in embroidery mode and the embroidery unit tries to initialize while the embroidery frame is attached. This message is displayed when the machine is ready to sew an embroidery pattern, and the "Start/Stop" button is pushed while the embroidery frame is not attached.