Brother International Quattro 2 6700D Users Manual - English - Page 105
Patchwork for Crazy Quilt, Sewing Curves Using a Zigzag, Stitch, Cord Guide Bobbin Cover Using a,
View all Brother International Quattro 2 6700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
■ Patchwork (for Crazy Quilt) Turn back the desired width of fabric and position it over the lower fabric, then sew so that the stitch bridges both pieces of fabric. SEWING THE STITCHES c Snap the cord guide bobbin cover into place, making sure that the gimp thread can be fed freely. * Make sure there are no restrictions when feeding the thread. ■ Sewing Curves (Using a Zigzag 3 Stitch) Shorten the stitch length setting to obtain a fine d Set the zigzag (approx. 1/16 width from 2.0-2.5 - 3/32 inch). mm stitch. Sew slowly, keeping the seams parallel with the fabric edge as you guide the fabric around the curve. e Attach presser foot "N". f Position the fabric right side up on top of the cord and place the cord to the rear of the machine under the presser foot. Utility Stitches ■ Cord Guide Bobbin Cover (Using a Zigzag Stitch) a Remove the bobbin cover from the machine (see page 54). b Thread the gimp thread through the hole the cord guide bobbin cover from top to in bottom. Position the thread in the notch at the back of the cord guide bobbin cover. a Fabric (right side) b Gimp thread g Lower the presser foot and make a decorative finish. start sewing to a Notch b Gimp thread 103