Brother International Quattro 2 6700D Users Manual - English - Page 127
Appliqué Sharp Curves, Appliqué Corners
View all Brother International Quattro 2 6700D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Appliqué a Use a temporary spray adhesive, fabric glue or a basting stitch to attach the appliqué to the fabric. * This will keep the fabric from moving during sewing. SEWING THE STITCHES ■ Appliqué Sharp Curves Stop the machine with the needle in the fabric outside the appliqué. Raise the presser foot and turn the fabric a little bit at a time while sewing for an attractive finish to the seam. a Appliqué b Fabric glue ■ Appliqué Corners 3 Stop the machine with the needle in the right position of the outside (or inside) corner of the appliqué. Raise the presser foot and pivot the fabric to align the fabric edge. Lower the presser foot and continue stitching. Utility Stitches b Select or . * Adjust the stitch length and width to correspond to the appliqué shape, size, and quality of material (see page 78). Memo • For details on each stitch, refer to the "STITCH SETTING CHART" at the end of this manual. c Attach needle presser foot "J". Check that the drops slightly off the edge of the appliqué, then start sewing. a Appliqué material a Needle drop position a Outside corner b Inside corner Memo • Placing a lightweight tear away stabilizer beneath the stitching area will improve the stitch placement along the edge of the appliqué fabric. 125