Brother International Quattro 2 6700D Users Manual - English - Page 181

USING THE MEMORY FUNCTION b Insert the USB media into the USB port on the machine. primary (top) Saving Stitch Patterns in the Computer Using the included USB cable, the machine can be connected to your computer, and the stitch patterns can be temporarily retrieved from and saved in the "Removable Disk" folder in your computer. A total of about 3 MB of stitch patterns can be saved in the "Removable disk", but the saved stitch patterns are deleted when the machine is turned OFF. a Primary (top) USB port for media b USB media Note • The processing speed may vary by port selection and quantity of data. You can also plug a USB media into the center port, but the primary (top) USB port will process the data faster. It is recommended to use the primary (top) USB port. • Two USB media cannot be used with this machine at the same time. If two USB media are inserted, only the USB media inserted first is detected. Note • Do not turn the main power to OFF while the "Saving" screen is displayed. You will lose the stitch pattern you are saving. a Plug the USB cable connector into the corresponding USB ports for the computer and for the machine. 4 b Turn on your computer and select "Computer (My computer)". * The USB cable can be plugged into the USB ports on the computer and machine whether or not they are turned on. c Press . * Press saving. to return to the original screen without Character/Decorative Stitches → The "Saving" screen is displayed. When the pattern is saved, the display returns to the original screen automatically. Note • Do not insert or remove USB media while "Saving" screen is displayed. You will lose some or all of the pattern you are saving. a USB port for computer b USB cable connector → The "Removable Disk" icon will appear in "Computer (My computer)" on the computer. Note • The connectors on the USB cable can only be inserted into a port in one direction. If it is difficult to insert the connector, do not insert it with force and check the orientation of the connector. • For details on the position of the USB port on the computer (or USB hub), refer to the instruction manual for the corresponding equipment. 179