Brother International Quattro 2 6700D Users Manual - English - Page 54

LOWER THREADING f Pass the thread through the thread guide. ■ Using the Spool Stand To wind thread on the bobbin while the spool stand is installed, pass the thread from the spool through the thread guide on the telescopic thread guide, and then wind the bobbin according to steps e through k of "Using the Supplemental Spool Pin"on page 49 to page 51. a Thread guide g Pass the thread around the pre-tension disk making sure that the thread is under the pre-tension disk. a Thread guide b Pre-tension disk h Follow steps through 51. g through k on page 50 Memo • See page 21 to assemble the spool stand. • See page 63 to thread the machine using the spool stand. CAUTION • When winding thread on the bobbin, do not cross the bobbin winding thread with the upper thread in the thread guides. 52