Cisco 7920 Administration Guide - Page 130
Configuring Static Settings, DHCP Enable/Disable, Select, Enable, Disable
UPC - 746320774732
View all Cisco 7920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Configuring Network Profile Settings Chapter 5 Configuring Network Profiles on the Cisco Wireless IP Phone 7920 Step 3 Step 4 Step 5 Scroll to DHCP Enable/Disable and press Select. Scroll to Enable or Disable and press Select. A check mark appears next to the selected option. Press Back to exit the menu. Related Topic • Configuring Static Settings, page 5-6 Configuring Static Settings When DHCP is disabled in the network, you must configure the following settings in the Static Settings menu: • IP address • Subnet mask • Primary Gateway • Primary TFTP server • DNS servers (Primary and Secondary) Use these guidelines when manually configuring the IP settings: • Ensure the TFTP server has an IP address. • Ensure the default gateway IP address is on the same subnet as the host IP address. Note Procedures involved in configuring IP settings or the TFTP option cannot be completed when DHCP is enabled in your network. Procedure Step 1 Step 2 Step 3 Choose Menu > Profiles > Network Profile. Scroll to the profile name that you want to configure and press Select. Choose DHCP Enable/Disable > Static Settings and press Select. Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1 5-6 OL-7104-01