Cisco 7920 Administration Guide - Page 73

Chapter 3 Setting Up Cisco Wireless IP Phones Installing the Cisco Wireless IP Phone 7920 Step 8 Step 9 Step 10 Step 11 Select the Cisco 7920 phone type from the drop-down menu and click Next. The Phone Configuration window displays. In the Phone Configuration window, enter information in the following fields: • MAC Address • Domain Name associated with this MAC Address Click Insert. The Cisco CallManager Administration application asks if you want to assign a directory number. Enter the required fields. Note If you are running a Cisco CallManager version that is earlier than release 3.3(3) SR1, you must assign the Cisco IP Phone 7960 phone type to the Cisco Wireless IP Phone 7920 when adding the phone through the Cisco CallManager Administration application. Related Topics • Adding Phones with Auto-Registration, page 3-8 • Adding Phones with Auto-Registration and TAPS, page 3-9 • Adding Phones with Cisco CallManager Administration, page 3-11 • Adding Phones with BAT, page 3-10 Installing the Cisco Wireless IP Phone 7920 After setting up the wireless network to support voice communications and configuring the Cisco Wireless IP Phones in Cisco CallManager, you are ready to install the phones. This section includes the following installation information. • Safety and Performance Information, page 3-14 • Providing Power to the Cisco IP Phone, page 3-17 • Powering On the Wireless IP Phone 7920, page 3-23 OL-7104-01 Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1 3-13