Cisco 7920 Administration Guide - Page 63

Chapter 3 Setting Up Cisco Wireless IP Phones Preparing to Install the Cisco Wireless IP Phone 7920 Table 3-1 Configuration Task List for the Cisco Wireless IP Phone Required Task Purpose For More Information 1. Gather the following information for use in Cisco CallManager Administration: Use this information when using the Phone Configuration page in Cisco CallManager Administration. See the "Adding Phones to the Cisco CallManager Database" section on page 3-7. • Information for the device Device Information fields on this See the "Configuring Cisco information fields, if page auto-populates if information Wireless IP Phones in applicable, such as the is relevant and available. You can Cisco CallManager" section device pool and calling edit fields to override system on page 7-2. search space. settings on a per-device basis. Refer to Cisco CallManager • The Cisco CallManager System Guide. user to associate with the phone. Refer to Cisco CallManager Administration Guide. • The number of lines and associated directory numbers to assign to the phone • Features to configure for the phone. 2. Configure routers, gateways, and switches to handle voice communication. Establishes the infrastructure for the IP telephony network. See the "Components of the VoIP Wireless Network" section on page 2-5 and the documentation included with these devices. 3. Perform a site survey to Identifies areas where RF signal Refer to the Cisco Wireless determine where to place and coverage is required. Locates high IP Phone 7920 Design and install access points (APs) for usage areas (conference rooms), Deployment Guide. wireless voice coverage. areas with RF interference (labs, equipment rooms), and other necessary coverage areas for wireless phones (stairwells, elevators, breezeways). Cisco Wireless IP Phone 7920 Administration Guide for Cisco CallManager Release 4.0 and 4.1 OL-7104-01 3-3