Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 155

Defaults Command Modes Command History Related Commands No default behavior or values CONFIGURATION Version 8.1.1.0 Introduced on E-Series ExaScale Version 7.5.1.0 Introduced on C-Series E-Series original Command ip address Assign a primary and secondary IP address to the interface. write c e s Copy the current configuration to either the startup-configuration file or the terminal. Syntax Parameters write {memory | terminal} memory terminal Enter the keyword memory to copy the current running configuration to the startup configuration file. This command is similar to the copy running-config startup-config command. Enter the keyword terminal to copy the current running configuration to the terminal. This command is similar to the show running-config command. Command Modes Command History EXEC Privilege Version 8.3.5.0 Introduced on the S55. Version 8.1.1.0 Introduced on E-Series ExaScale Version 7.6.1.0 Introduced on S-Series Version 7.5.1.0 Introduced on C-Series E-Series original Command Related Commands Usage Information save Save configurations created in uBoot. The write memory command saves the running-configuration to the file labeled startup-configuration. When using a LOCAL CONFIG FILE other than the startup-config not named "startup-configuration" (for example, you used a specific file during the boot config command) the running-config is not saved to that file; use the copy command to save any running-configuration changes to that local file. Control and Monitoring | 155