Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 600

www.dell.com | support.dell.com all bgp connected isis list ospf rip static summary (OPTIONAL) View information for all IPv6 routes (OPTIONAL) View information for all IPv6 BGP routes (OPTIONAL) View only the directly connected IPv6 routes. (OPTIONAL) View information for all IPv6 IS-IS routes (OPTIONAL) View the IPv6 prefix list (OPTIONAL) View information for all IPv6 OSPF routes (OPTIONAL) View information for all IPv6 RIP routes (OPTIONAL) View only routes configured by the ipv6 route command. (OPTIONAL) View a brief list of the configured IPv6 routes. Defaults Command Modes Command History Example No default values or behavior EXEC EXEC Privilege Version 8.2.1.0 Version 7.8.1.0 Version 7.4.1.0 Introduced on E-Series ExaScale Introduced on C-Series and S=-Series Introduced Figure 18-6. Command Example: show ipv6 route Force10#show ipv6 route Codes: C - connected, L - local, S - static, R - RIP, B - BGP, IN - internal BGP, EX - external BGP,LO - Locally Originated, O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2, E1 - OSPF external type 1, E2 - OSPF external type 2, i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, IA - IS-IS inter area, * - candidate default, Gateway of last resort is not set Destination Dist/Metric, Gateway, Last Change C 2001::/64 [0/0] Direct, Gi 1/1, 00:28:49 C 2002::/120 [0/0] Direct, Gi 1/1, 00:28:49 C 2003::/120 [0/0] Direct, Gi 1/1, 00:28:49 C 2004::/32 [0/0] Direct, Gi 1/1, 00:28:49 L fe80::/10 [0/0] Direct, Nu 0, 00:29:09 Example Figure 18-7. Command Example: show ipv6 route summary Force10#show ipv6 route summary Route Source Active Routes connected 5 static 0 Total 5 Total 5 active route(s) using 952 bytes Non-active Routes 0 0 0 600 | IPv6 Basics