Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 304
neighbor remote-as
View all Dell Force10 S55T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 304 highlights
www.dell.com | support.dell.com To delete a passive peer-group, use the no neighbor peer-group-name peer-group passive command. Parameters peer-group-name Enter a text string up to 16 characters long as the name of the peer group. Defaults Not configured. Command Modes ROUTER BGP Usage After you configure a peer group as passive, you must assign it a subnet using the neighbor Information soft-reconfiguration inbound command. Related Commands neighbor soft-reconfiguration inbound Assign a subnet to a dynamically-configured BGP neighbor. Command History Version 8.3.5.0 Version 7.8.1.0 Version 7.7.1.0 Introduced on the S55. Introduced support on S-Series Introduced support on C-Series neighbor remote-as c e s Create and specify the remote peer to the BGP neighbor. Syntax neighbor {ip-address | peer-group-name} remote-as number To delete a remote AS entry, use the no neighbor {ip-address | peer-group-name} remote-as number command. Parameters ip-address peer-group-name number Enter the IP address of the neighbor to enter the remote AS in its routing table. Enter the name of the peer group to enter the remote AS into routing tables of all routers within the peer group. Enter a number of the AS. Range: 0-65535 (2-Byte) or 1-4294967295 (4-Byte) Defaults Not configured. Command Modes ROUTER BGP Usage Information You must configure your system to accept 4-Byte formats before entering a 4-Byte AS Number. If the number parameter is the same as the AS number used in the router bgp command, the remote AS entry in the neighbor is considered an internal BGP peer entry. This command creates a peer and the newly created peer is disabled (shutdown). Related Commands router bgp bgp four-octet-as-support Enter the ROUTER BGP mode and configure routes in an AS. Enable 4-Byte support for the BGP process. Command History Version 8.3.5.0 Introduced on the S55. 304 | Border Gateway Protocol IPv4(BGPv4)