Dell Force10 S55T FTOS Command Line Reference Guide for the S55 System FTOS 8. - Page 607

Related Commands TCP Port Target IP Address 3260 860 show iscsi session show iscsi session detailed show run iscsi Display information on active iSCSI sessions on the switch. Display detailed information on active iSCSI sessions on the switch. show run iscsi show iscsi session Display information on active iSCSI sessions on the switch. Syntax show iscsi session Command Mode EXEC EXEC Privilege Command History Version 8.3.12.0 Version 8.3.16.0 Introduced on the S4810. Introduced on MXL 10/40GbE Switch IO Module Usage Information Example Related Commands Only sessions observed by the switch will be learnt; sessions flowing through an adjacent switch will not be learnt. Session monitoring learns sessions that actually flow through the switch, it does not learn all sessions in the entire topology. After a switch is reloaded, any information exchanged during the initial handshake is not available. If the switch picks up the communication after reloading, it would detect a session was in progress but could not obtain complete information for it. Any incomplete information of this type would not be available in the "show" commands. FTOS# show isci session Session 0 Target: iqn.2001-05.com.equallogic:0-8a0906-0e70c2002-10a0018426a48c94-iom010 Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg ISID: 400001370000 Session 1 Target: iqn.2001-05.com.equallogic:0-8a0906-0f60c2002-0360018428d48c94-iom011 Initiator: iqn.1991-05.com.microsoft:win-x9l8v27yajg ISID: 400001370000. show iscsi show iscsi session detailed show run iscsi Display the currently configured iSCSI settings. Display detailed information on active iSCSI sessions on the switch. show run iscsi iSCSI Optimization | 603